1932 WA Perry & Co Silver Watch and Band - From England Through eBay

Another watch came in the mail the other day this one is rather interesting.  While it is not some flawless mint condition high name vintage watch, it is very unique.  There are multiple names on the watch and this is not because it was pieced together my some mad watchmaker.  Back when it was made the Jeweler on the dial, now hard to read, WA Perry & Co Birmingham.  The watch model "Crusader" is still very visible.

The hands appear to be all original along with the dial.  It has escaped decades without any refinishing.  

The case is an ALD (A L Dennison) marked silver case.  I am very familiar with the Dennison marked cases as I spent time in the UK.  Every Waltham Traveller pocket watch there I saw had a Dennison case.  Many of the 9ct cases and sterling cases were ALD marked.  The hallmarks are for sterling, Birmingham, and the date letter H for 1932.  The hinge on it is still very good for an over 80 year old watch.

The movement is marked Adie-Marlys Watch Co.  From what I have found researching is that the Crusader was one of their brands.

Under the dial the movement is marked for FHF.  There is no ref number to identify it.

The movement is also marked Non-Magnetic Compensated 15 Rubies 2 Adj.  It still has a very nice gilt finish to it that is still bright.

Please stay tuned to my blog as I have a watch I will be getting on Saturday I will be posting about.  It is a solid 14K box hinged hunter case BW Raymond from 1886.  I also have a deal going on Saturday that may net me another  watches as well.

Self Supporting Collecting

I know I talked about this before but I figure after this much time and this many posts I should go back over it.  Unless you have a great job paying you lots of money and much of that is disposable you will always be limited in what you can buy.  Those higher end watches will always seem out of reach without lots and lots of saving.

So that is where the idea of using your knowledge and free time hunting down the good deals.  It becomes a challenge or a game then and makes things a bit more interesting.  You have to have some self control though because you can't keep them all.  If I could have kept all the watches I have had over the past 25 years I would have 500-600 watches by now.  Some amazing ones and some that are just flat out uninteresting.  But the trick is to keep in mind that there is better stuff out there and only keep the best of the best.  Keep what you feel belongs in a great collection.

That does mean you need to sell some good ones now and then to keep the cash flowing but better will come along.  The idea is simple though, just like any investing, buy low and sell high.  The better your profit margin the better chance you have of buying better and better watches.  Buy a $100 watch for $25 and now you have $90 (after fees) to buy the next one.  You find a $200 for the $90 you buy it and sell and now you have $190 to play with.

The idea is to have a rolling stock of watches for sale that you paid a small percent of the value for and a second group that is your personal collection.  You will come across great deals looking in the right places but you have to decide what goes, and that can be tough at times.  I have not only sold to buy more watches, I have sold to pay unexpected bills as well.  So in that way it can become a revenue stream as well but the more you take away from the watch buying and selling cycle it is setting you back.

The best buying locations are not often your best places to sell.  Ebay is the exception to the rule.  You could buy and sell there and profit but it takes lots of work and searching to find the right buy then list it right and then sell there.  Do it too soon and people researching will see the purchase for a low amount and think that is what the watch is worth.  That makes it a harder to sell watch on there.  I tend to like to reserve eBay as the place to buy for the collection and sell the local finds.

These were all local finds and most have moved on while others stay in the collection.

Traded for watch and cash...

In collection

Sold

For sale

Sold

Sold

Sold

Sold

Including this solid gold 16 size Waltham...  Sold

    

Silver Dial South Bend Grade 429 12 Size Pocket Watch

I picked up a rather unusual 12 size South Bend pocket watch a few weeks back.  I managed to pick it up in a lot and this one was the fixer.  In this instance the movement is not what makes this watch unusual but the dial. I never thought of it when I looked at it to begin with.  There were multiple issues to the watch when I got it.  A few rusted screws and a bad mainspring.  It was a risk but the balance was good.  

The dial to the watch is original but when I was cleaning it I found the back markings "Argent 935". 

The dial appears to have been made by a Swiss dial maker out of 935 silver for South Bend. The dial is in great shape for being made in 1923. 

The movement is a good quality 19 jewel 12 size grade 429 that was just cleaned and is in great running condition. 

The case has no brassing and from the way it looks...it is green gold filled.  

While cleaning I went ahead and replaced the crystal and of course the mainspring.  The watch is now very happily ticking along again instead of becoming a parts watch.

Newest Family member - 1951 Hamilton 950B Pocket Watch

Sometimes things just line up and you manage to get a watch you have always wanted for an amazing price.  I was feeling low because I sold my Omega..... Yes it still bugs me but I had watches to pay for and get caught up.  From the amount I had left over I decided to try and cheer myself up.  Ebay I went for a bit of hunting.  I pawed around for a bit looking at this and that but just settled on a Republic of Texas fantasy $100.

A few hours later I just went to my usual watch search and the second item down was a watch I knew the only possible thing it was based on the title.  In big letters right there "Hamilton Pocket Watch 23 Jewel Railway Special" and that could only be one model Hamilton with that dial and case...a 950B.  I frantically hit the buy it now option and paid within 10 seconds.  There was a make offer option but at $199 I doubt any other collector would have taken the chance of not getting it to save a few dollars.
So it was a risk, I never even looked at the description and there was only a picture of the front and back.  I rarely say buying on a impulse is good because we can get burned so easily.  IT could have had a chap quartz movement in it.  It could have been a total rust bucket.  Could have a broken staff or mainspring or both and a bent center wheel.  Could have been a completely different movement with a 950B dial that had the dial feet ground off and the dial glued to it. Luckily they at least said it ran and was way better then I could have hoped....

This is one of my new prized watches......

It has the correct Hamilton model "A" railroad case that has a little brassing in the oddest places.  The brassing is only at 1 and 11 on the movement ring.  None on the case back and none on the front bezel.  I still have not worked that out. 

The dial is a melamine one and has a few slight flaws but they don't show up unless you look for them.  Otherwise it has not suffered the cracking and damage that you see on so may other watches like the Hamilton 992B of that time.

The watch is way better condition then I thought.  This is what I saw for the auction...

Needless to say a polish and a new crystal were needed.  The spots were a sticker residue.

I love that mirror shine on the winding wheels.  The over all condition is fantastic.  Not a spot of rust or dirt anywhere.  

The overall quality of the watch shows why they are considered one of the best Hamiltons ever made.  I decided to wind it up and see how well it ran and what repairs it may need.  I even ordered a mainspring before the watch arrived but the watch got here and the mainspring is still on the way.  After a full wind the watch kept better than a min in 36 hours.  I would have checked it to the second but I never expected it to be that accurate without a fresh service.

Being that is is a B and of the late 40's to early 50's period I consider them the peak of performance and accuracy.  They had all the advancements in metallurgy and design that they developed for decades.  Once the mainspring arrives it will get a fresh spring, clean and oil. 

Off Topic - Gorham 150th Anniversary Sterling Silver Tea Set 1 of 15

I try and stay on topic most of the time.  This is after all my watch blog but I do still have the antiques and metals I deal in.  So a friend of mine who is the manager of a pwn shop called me up to ask if something someone was trying to sell him was real.  After a few minutes of conversation he sent me a few pictures.  Full sterling mark for Gorham along with the other information   So I tried looking it up but I could only fins an eBay which said that the said it had a retail of $18,000 and that it was purchased for $10,500.  My cost.....just under scrap.

If I am not mistaken it is a tea pot, coffee pot, creamer and sugar with lid.  The pattern is named "Chantilly".  The set is not light and comes in at just over 81 troy ounces.

"Gorham Sterling 150 years of Craftsmanship 1831-1981 Limited Edition 1/15" The 597 on this piece is a reference number for this particular teapot and each of the other pieces have a different reference number.

All pieces are marked the same "1/15" and the reference number changes.  I even lucked out and have all paper labels still in perfect condition.  One thing I cant understand is why it looks like only the tall coffee pot appears to have tarnished and been used.  All other pieces seem to be completely unused.

Way more tarnish even on the bottom.  I did manage to get most of it off of the rest of the piece. This posed its own challenge as the entire finish to the pieces is a brushed one.

The lack of a high polish means that you have to use much different methods to remove tarnish and more stubborn spots.  I ended up making a baking soda paste.  The baking soda actually acts to remove the tarnish as you rub by hand and the actual particles help maintain that fine brushed look.

That said though it may still polish more as the particles are very small so I will need to buy some steel wool to help keep the finish correct.  If you have any of these pieces please try and maintain the finish the best you can.

The gold wash inside the creamer is superb with a beautiful mirror shine.  The overall finish of the pieces gives you an idea of the quality work they put into them.  Each one had the pattern done by hand.

I wish I could have gotten this sheet and the original receipt from the owners but they decided to keep them after they sold the set to the store.

So here is my appeal to anyone out there that has one of these sets....  Please comment or send me a message.  I am trying to find out how many of these very limited production sets survive.  I don't care how old this post gets, you can still comment or message me.  I believe one set is no longer complete.  I have seen that Replacements has had a teapot in that was marked for the 150th anniversary so that is one down.  In the recent years silver prices spiked and I am curious if any of these made their way to the refinery.

These are way too rare and too nice of a set to just be treated as scrap metal.  Mine now resides in a display cabinet with my other silver.